Frame Relay was developed to solve communication problems that other protocols could not: the increased need for higher speeds, an increased need for large bandwidth efficiency, particularly for clumping ("bursty" traffic), an increase in intelligent network devices that lower protocol processing, and the need to connect LANs and WANs. Like X.25, Frame Relay is a packet-switched protocol. But the Frame-Relay process is streamlined. There are significant differences that make Frame Relay a faster, more efficient form of networking. A Frame-Relay network doesn't perform error detection, which results in a considerably smaller amount of overhead and faster processing than X.25. Frame Relay is also protocol independent-it accepts data from many different protocols. This data is encapsulated by the Frame-Relay equipment, not the network.

'Today's LANs and computing equipment have the potential to run at much higher speeds and transfer very large quantities of data. With the diversity and complexity of today's networks, management can be a mammoth task if you don't have the proper tools. Each environment is a unique combination of equipment from different vendors. Frame Relay uses a packet-switching technology, similar to X.25, but is more efficient. As a result, it can make your networking quicker, simpler, and less costly.

Frame Relay sends information in packets called frames through a shared Frame-Relay network. Each frame contains all the information necessary to route it to the correct destination. So in effect, each endpoint can communicate with many destinations over one access link to the network. And instead of being allocated a fixed amount of bandwidth, Frame-Relay services offer a CIR (committed information rate) at which data is transmitted. But if traffic and your service agreement allow, data can burst above your committed rate. Since Frame Relay has a low overhead, it's a perfect fit for today's complex networks. You get several clear benefits: First, multiple logical connections can be sent over a single physical connection, reducing your internetworking costs. By reducing the amount of processing required, you get improved performance and response time. And because Frame Relay uses a simple link layer protocol, your equipment usually requires only software changes or simple hardware modifications, so you don't

Ever used a t1 internet connection? Upgrading to this level of service is like going from an old used car to a new sports car. You'll feel the speed imediately! While both T1 and DSL connections claim to have a speed of 1.5Mbps, the former actually delivers it's claim. DSL and cable connections are severely oversubcribed and cannot always deliver the bandwidht they project expecially at peak hours. Ready to feel the difference? You may have already if your office has critical applications that use the web. If your office hosts e-mail, webservers or more than 20 people on internet access you most likely already have a dedicated T1 connection. If not, get one fast!!

A T1 internet connection is ideal because of it's reliability. Not only is it not oversubscribed, it also has low latency which mean fewer delays. Latency becomes critical in applicaions like video on demand, webconferencing, and gaming. While the latter may not seem so important, gamers require some of the best internet connections and are a good source for information on the top internet products available. Our Page Keywords Are: Alta frame relay Alta OC3 line Alta OC3 connection Alta OC3 service Alta OC3 provider Alta OC3 internet Alta OC3 internet connection Alta OC3 service provider Alta OC3 price Alta OC3 speed Alta OC3 internet service Alta OC3 internet access Alta fractional OC3 Alta OC3 bandwidth Alta OC3 internet service provider Alta OC3 internet provider Alta OC3 pricing Alta OC3 internet services Alta OC3 services. These keywords provide a brief overview of the services offered by ShopforOC3 in your city.

If you're ready to move into the fast lane or to put your office on a reliable connection that you should have anyway, get some advise from a broker that deals in T1 services. Brokers don't mark up the price of services. They offer the same price you would get if you did go direct to the company. The advantage of ordering through a broker is that you will get a second channel of customer service. If the company is not performing to expectation you will always be able to go back to your broker who puts a significant volume through the carrier. A broker is much more likely to get the companies attention and have your problem solved. In our opinion, a broker is the only way to go!

Definition 1. - A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.

Definition 2. - The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.

Definition 3. - The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Alta T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet

Definition 4. - A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.

Alta ShoreTel Dealers | Alta Nortel Dealers | Alta NEC Dealers | Alta Mitel Dealers | Alta Cisco Dealers | Alta IP PBX Phone System | Alta Avaya Dealers